Opticon H25 Скачать руководство пользователя страница 34

Страница: 34 / 99

8. upon reading a barcode, the red LED indicator turns on until the trigger is release or after five seconds. The green LED and the

beep tone indicates a good read.

Note:

This product scans using laser light. Never look directly into the laser light or shine the laser light into the eyes.

2.5.8 Installing the MicroSD Card

1. Turn the locking latches (right and left) downwards and lift the battery cover away from the Device.

Figure -22

Detach the battery cover from Device

2. Detach MicroSD Holder and Insert the MicroSD Card into the MicroSD compartment.

Figure -23

Detach the SD Holder from Device

2.6 Power management

2.6.1 Suspend Mode

The Device will go into a suspend mode when it is idle for a period of time. The idle duration can be customized using the

Power

control panel (refer to Figure “

Schemes Tab

”) Suspend mode works and looks just like you have turned the unit off. Press the

key to suspend the Device, Press the

key again for the Device to resume its Previous state.

Содержание H25




































































































Результаты поиска

Содержание H25

Отзывы:

Похожие инструкции для H25

Бренды по названию

Популярные бренды

Opticon H25, Руководство пользователя

Результаты поиска

Содержание H25

Отзывы:

Похожие инструкции для H25

Бренды по названию

Популярные бренды