6
1.3 Notice of safe usage
We recommend you to read following warning, precaution and information before start to
operate the OMM-2500 modular matrix.
▪
Use of the equipment in a manner not specified by the manufacturer may result in ire-
coverable damage.
▪
Keep the unit away from liquid, magnetic and combustible substances.
▪
Do not place heavy weight on the unit.
▪
Move away from noisy environment such as vibration or impact.
▪
Do not install the unit vertically. / Do not disassemble the unit.
▪
Carry the unit using the handle in front of the panel
with two (2) Users.
1.4 Physical description
The OMM-2500 modular matrix chassis is mountable on a
19” standard rack. Key buttons,
LCD display and power switch are placed on the front panel as shown in Figure 1-1.
Figure 1-1 Front and Rear panel of OMM-2500
All Input and output cards, interface ports and power supplier are placed on the rear panel as
below.
▪
Input bay
for 4 input cards (left side)
▪
Output bay
for 4 output cards (right side)
▪
RS-232 / F1
, Serial communication and Main Firmware port
▪
F2
, Input Firmware port
▪
F3
, output Firmware port
▪
LAN
, RJ-45 receptacle for TCP/IP or UDP control
▪
REFERENCE OUTPUT
for internal video source for easy installation
▪
MONITORING OUTPUT
for internal output port to monitor input signal
▪
Power supplier
(Dual-power is an option)
