30
4.2 Connect Info
▪
Move the mouse cursor at the top of the black bar.
▪
Click the right mouse button and select
“Setting” to set the control.
▪
Select the way of control method between RS-232 and UDP(Ethernet).
▪
In case of RS-232 control, enter available COM port number of your PC and select baud
rate. The baud rate should be same as that OMM-2500. (115200 is default)
▪
In case of Ethernet, enter IP address of OMM-2500 and port number. 3000 is default port
number of OMM-2500.
▪
Click Open button to finish the setting.
▪
If the connection is properly made, current status of OMM-2500 will be shown.
[NOTE] Click the right mouse button at the top of the black bar and select
“Refresh” to
update the current status, if it
’s necessary.
[NOTE] Click the right mouse button at the top of the black bar and select
“Show Log Handler”
to check the current command status, if it
’s necessary. Then, the Message window
will be shown.
