Troubleshooting
The display displays only black screen.
•
Check that all AC and DC plugs and jacks used by external power
supplies (both Opticis and others) are firmly connected.
•
Ensure that power bars are live.
•
Ensure that the Tx and Rx boxes plug correctly to the media receiver
or computer and display, respectively.
•
Check if the media receiver or computer and display are powered on
and properly booted.
•
Re-boot up the system after reconnecting the optical system cable.
Screen is distorted or displays noises.
•
Check if the graphic resolution is properly set. Go to the display
properties and tap the settings. Ensure that the resolution sets less
than UXGA (1,600x1,200) at 60Hz refresh ratio.
•
Reset the system.
•
Power down, disconnect and reconnect the optical system cable or
DC power adaptors, and power up.
Maintenance
No special maintenance is required for the optical system cables and power
supplies. Ensure that the cables and power modules are stored or used in a
benign environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For
technical service, contact Opticis by email
or visit its
website at
www.opticis.com
.
1-5 Troubleshooting, Maintenance, Technical Support
Product Specifications
M1-2R2H-TR Optical HDMI Module
Compliance with HDMI standard:
supports HDMI 1.0, using fiber-
optic communication links and DDC2B.
Extension limit:
100m (330feet) for UXGA (1,600x1,200) at 60Hz
refresh rate in ultimate operation.
Graphic Transmission Bandwidth:
supports up to 1.65Gbps
bandwidth per graphic channel at UXGA at 60Hz.
Fiber-optic Connection:
The transmitter and receiver boxes of M1-
2R2H-TR have 2 duplex LC receptacles connected to four
62.5/125
µ
m or 50/125
µ
m Multi-Mode glass fibers cables.
Mechanical specifications of Tx and Rx boxes
Dimensions:
38mm / 19mm / 72mm (W/H/D)
Weight:
46.0
±
1.5 gr for each of Tx and Rx.
Environmental Specifications
Operating temperature: -10°C to 50°C
Storage temperature: - 30°C to 60°C
AC/DC Power Adapter
Power Input:
Universal AC 85-264V, 50/60Hz, AC power cord with
power jack.
Power Output:
+12 V, 3.0 A SMPS DC-power Adapter
Cord DC Jack & length:
Core is 12 V and outer cylinder is GND.
Length is 18.5 cm
AC Cord length: 1.8m
Certification
:
PSE, UL, cUL, FCC, CE, TUV-GS
1-6 Product Specifications
