- 13 -
Remote Manager (PC Program)
1)
Installing PC Program
Important: First of all, you should check the IP address and Gateway of the PC which should be
set to the same IP class of the deviices,Txs and Rxs on Network setting of PC.
eg. Tx 192.168. 0.40 (GW 192.168.0.1), Rx 192.168.0.51(GW 192.168.0.1)
=> PC 192.168.0.xxx (GW 192.168.0.1)
(1) Run the setup.exe on the Window Operating System.
(2) Carry out the procedure according to on-screen instructions.
▶ It will take a few seconds installing procedure to be completed.
(3) Firstly, uninstall on the Control Panel of Window OS to re-install or upgrade the PC Program.
2)
Logging in
♦ If installation is completed, you can ready to access the PC program and setup system totally.
(1) Run the PC program (RemoteManager).
(2) Firstly, login as an admin ID & password to access the PC program.
Note. A default value of administrator ID and Password are “admin” and “12345” for logging in.
3)
User account
Note. A default administrator ID & password are “admin” and “12345”. You had better modify
the password.
(1)
Click Mouse right button to modify the value.