Installation
Important: Please keep the installation procedure below. Improper or no
operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents in the shipping group.
Step 2
Power on the HDMI source and display. Power on both transmitter and
receiver by using DC power adapter or USB power cable to Receiver (Rx).
Note1: Only Receiver (Rx) can be operated by USB power cable.
Figure 2
– Position of the LED
Step 3
Connect one (1) LC Multi-mode fiber (50um) between the transmitter and the
receiver. Then, the LED Blinking will be stopped, if the connectors are fully
engaged.
Fig Figure 3
– Connection of optical fiber
Note:
The maximum extension length by multi-mode fiber is 300m (985feet).
1-3 Installation
Step 4
Connect the Transmitter to the HDMI sources (DVD, media receiver) over
HDMI copper cable.
Figure 4
– Connection of HDMI copper cable between Transmitter and media receiver
Step 5
Connect the Receiver to the HDMI display over HDMI copper cable.
Figure 5
– Connection of HDMI copper cable between Receiver and display
Step 5
Make the source and the display power ON.
And ensure that the LED in
transmitter and receiver turn on.
1-4 Installation
Position of the LED
