Welcome!
Congratulations on your purchase of the one (1) fiber HDMI extender, HDFX-
200-TR. This manual contains information that will assist you in installing and
operating the product.
Product Description
The HDFX-200-TR transmits WUXGA (1920x1200) at 60Hz or 1080p at 60Hz refresh
ratio up to 300meters (985feet) over one (1) LC Multi-mode fiber. It has HDMI
receptacle and provides intermediate cable to be connected to various types of HDMI
connectors. It passes CEC, EDID & HDCP (High Definition Contents Protection) for
better installation flexibility and supports 3D contents transmission.
The HDFX-200-TR can be operated by DC power and also Receiver (Rx) can be
operated by USB power by plugging the USB cable included as a shipping group.
Figure 1
– Overall Connection of Optical HDFX-200-TR
The Shipping Group of
HDFX-200-TR;
One (1) Transmitter (Tx) and One (1) Receiver (Rx)
Two (2) HDMI copper cables (0.3m)
Two (2) DC +5V,1A power adapters
User
’s Manual
Option Product:
LC Multi-mode fiber
1-1 Welcome, Product Description
System Requirements for Setup
□
Hardware requirements
▪
DVD, Blu-Ray or media receiver with standard HDMI ports.
▪
In case of using PC as a graphic source, regardless of OS
version embedded HDMI ports.
▪
Only HDMI TVs or monitors are applicable.
▪
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the optical link.
□
Software requirements
▪
No special needs, but make sure that media contents protected
by HDCP should be played with HDCP certified players and
TVs.
□
AC/DC Power Adapter Technical Advisory
▪
Enclosed Power Adaptor supply power to both (Tx) and (Rx).
□
Connection Advisory
▪
It is highly recommend that HDMI media source is directly
connected into HDMI display output via HDFX-200-TR without
connection to incompatible distributor, switcher and selector.
1-2 System Requirements for Setup
