Welcome!
Congratulations on your purchase of the Four (4) fibers HDMI extender, HDFX-
150-TR. This manual contains information that will assist you in installing and
operating the product.
Product Description
New optical HDMI extender, HDFX-150-TR is designed compact enough to be
fitted into various installation environments, and enables to transmit WUXGA
(1920x1200) or 1080p at 60Hz signal up to 300m (985feet) over four (4) LC
multi-mode fibers, avoiding any tricks like scaling or data compression for
lessening a burden of data transmission and supports 3D contents
transmission.
The pure fiber connection by four (4) LC fibers connector between transmitter
and receiver, gives clean, secure and easy installation with perfect electrical
isolation, but without electrical hazard and interference. The HDFX-150-TR can
be operated by either USB power by USB to DC plug cable or 5V DC power
adapter included as a shipping group.
Figure 1
– Overall Connection of HDFX-150-TR
The Shipping Group of
HDFX-150-TR;
One (1) Transmitter (Tx) and One (1) Receiver (Rx)
Two (2) HDMI copper cables (0.5m)
Two (2) USB to DC plug Cables
One (1) DC +5V,1A power adapter
User
’s Manual
Option Product:
LC Multi-mode fiber
1-1 Welcome, Product Description
System Requirements for Setup
□
Hardware requirements
▪
DVD, Blu-Ray or media receiver with standard HDMI ports.
▪
PC with HDMI port regardless of OS version.
▪
Only HDMI TVs or monitors are applicable.
▪
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the optical link.
□
Software requirements
▪
No special needs, but make sure that media contents protected
by HDCP should be played with HDCP certified players and
TVs.
□
Power Technical Advisory
▪
Enclosed 5V DC Power Adaptor and USB to DC plug cables
supply power to both Transmitter and Receiver.
□
Connection Advisory
▪
It is highly recommend that HDMI media source is directly
connected into HDMI display output via HDFX-150-TR without
connection to incompatible distributor, switcher and selector.
1-2 System Requirements for Setup
