Welcome!
Congratulations on your purchase of the 4K HD-BaseT extender, HDCX-100-
TR. This manual contains information that will assist you in installing and
operating the product.
Product Description
New HD-BaseT 4K HDMI2.0 extender, HDCX-100-TR is designed compact
enough to be fitted into various installation environments, and enables to
transmit 4K UHD (3840x2160) @ 60Hz 4:2:0 (or 30Hz 4:4:4), USB2.0 and RS-
232 signal up to 100m (330feet) over one (1) CAT5e or CAT6 cable.
USB2.0 could access to printers, scanners, touch panels and external storages
as well as HID and VCP. Its max speed is 280Mbit /sec.
RS-232 serial interface offers device-to-device and device-to-controller
connections to build up control system for A/V integration.
Figure 1
– Overall Connection of HDCX-100-TR
The Shipping Group of
HDCX-100-TR;
One (1) Transmitter (Tx) and One (1) Receiver (Rx)
Two (2) DC +5V,2A power adapter
One (1) 3pin connector for RS-232
User
’s Manual
Optional Product:
Mounting Bracket for HDCX-100
1-1 Welcome, Product Description
System Requirements for Setup
□
Hardware requirements
▪
DVD, Blu-Ray or media receiver with standard HDMI ports.
▪
PC with HDMI port regardless of OS version.
▪
Any HDMI TVs, monitors and Projectors are applicable.
▪
Proper initial trial of the entire platform with its application using
a short length copper cable is recommended prior to install with
the product.
□
Software requirements
▪
No special needs, but make sure that media contents protected
by HDCP should be played with HDCP certified players and
TVs.
□
Connection Advisory
▪
It is highly recommend that HDMI media source is directly
connected into HDMI display output via HDCX-100-TR without
connection to incompatible distributor, switcher and selector.
1-2 System Requirements for Setup
