The LCD is equipped with special 3-button unit that is attached to
the left handlebar. There are three buttons: 1)
MODE
2)
Up
Arrow
and 3)
Down Arrow.
Programming Mode
To turn on the display, press the
MODE
button for 1.5 seconds until the
display lights up.
To enter program mode, hold both
UP
and
DOWN
for 2.5 seconds at the
same time, LCD will enter into the setting state and the settable parameter
will flash.
Wheel Diameter
The first setting parameter is wheel diameter. Press
UP
or
DOWN
to choose a
the right wheel diameter from 18-28 inch for the Bike. Default setting is
26 inch. After selection o f wheel size, press
MODE
to confirm it. This will
enter into the max speed setting screen.
Содержание Pioneer
Страница 1: ...Optibike Pioneer LCD Display Programming Guide V1 2 ...
Страница 12: ......
