Optibase MGW 2000e, Быстрый старт, Страница: 14 / 28

MGW 2000e Quick Start Guide
8
If your Network is not DHCP enabled
If your network is not DHCP enabled, you must define TCP/IP
settings for NIC A upon logging on for the first time. The
following section instructs you on how to define TCP/IP
settings.
To define TCP/IP settings:
1. In the Main menu, press 2 (Change Network Settings) ;
the Network menu appears.
2. Press 1 (Change TCP/IP Settings for NIC A) ; DHCP
options appear.
3. Press 2 (Disable DHCP and set TCP/IP parameters
manually) ; DHCP is disabled and TCP/IP options appear.
4. Enter the new IP address
and
Subnet mask for NIC A and
press Enter .
•
To make MGW 2000e accessible from outside your local
network, define the Default Gateway and press
Enter .
•
For instructions on defining TCP/IP settings for NIC B,
refer to the user manual.
The new parameters are defined and MGW 2000e returns
to the Network menu once you press
Enter .
5. To return to the Main menu, press 0 (Return to the
Previous Menu) .