opti-solar SP 5000 Vitality-S, Руководство по эксплуатации

Страница: 40 / 63

38
You need to set inverters after first installation so as to have proper operation
in the future.
After switching on SP VITALITY-S of the first installation, the initial setting
frame comes out automatically. The chart is indicated.
System Connection
This setting is to set single or multiple inverter connection of the system. The
selections are:
1 Single: only one inverter in this system
2 Parallel: The inverter AC mains are connected together; AC loads are
connected together to build up a bigger system
Set Mode
The selections are:
1 Off-grid: for pure off grid operation
2 Net Metering: Grid interactive mode. Extra PV power feeds to grid.
2.1 BAT -> Load: On. This will enable compensation loads from battery
2.2 BAT -> Load: Off. Disable above function
3 Self Using
3.1 BAT -> Load: On
3.2 BAT -> Load: Off
Set Clock
To set clock, press up and down keys to increase or decrease on blinking
characters; press Enter to change among day, month, year, hour and minute;
press Enter to confirm settings.
Flow of Initial Settings
Initial Settings is a “one-way” flow. You can not go back to
previous setting even you set wrong. In case incorrect
operation during setting, please set it again later on.
Disable Mains Charging Battery function
To enable load compensation from battery function, you need
to disable the mains charging battery function in settings