Optex PT-7LD, Инструкция по эксплуатации

Страница: 49 / 56

15
1
2
3
Press the /MAX/MIN or
/MEM./CAL. button to adjust the
year. Then press the MEASURE
button to fix the setting.
After the setting, the set year blinks
on the LCD.
4
Date and Time Setting
5
To the page that follows
Press this button while
the power is ON.
SET
Date and time can be set in PT-U80.
Perform the following steps.
*The setting returns to the default if batteries are removed.
The LCD display is switched in order
of "
ALM ", " EMS " and " TIME " each
time the SET button is pressed.
Display "
TIME " on the LCD.
After " TIME " blinks, " YEAR " blinks.
Then, the display is automatically
shifted to the state that "
YEAR " lights
up and the dominical year blinks.
After the set year blinks, " date "
blinks, then the display is
automatically shifted to the state that
" date " lights up, the left 2 digits of the
clock (month) blinks and the right 2
digits (day) lights up.
The left 2 digits of the clock indicate
a "month" and the right 2 digits
indicate a "day".
Press the /MAX/MIN or
/MEM./CAL button to adjust the
month. Then press the MEASURE
button to fix the setting.
After the setting, the right 2 digits of
the clock blink. Then go to the "date"
setting.