Optex FTN-R, Руководство по установке

Страница: 15 / 20

4-4 LED
DIP switch 4
FTN-R
FTN-RAM
ON
1 2 3 4 5 6
ON
OFF
Position Function
ON LED ON
OFF
(Factory
default)
LED OFF
Note>>
If the LED lights, check the DIP
switch 1 (WALK TEST MODE)
setting. •
4-5 PIR SENSITIVITY
DIP switch 5
FTN-R
FTN-RAM
ON
1 2 3 4 5 6
Position Function
STD
(Factory
default)
Normal sensitivity
LOW Low sensitivity
4-6 ANTI-MASKING
DIP switch 6
FTN-R
FTN-RAM
ON
1 2 3 4 5 6
Position Function
ON
(Factory
default)
ANTI-MASKING ON
OFF ANTI-MASKING OFF
-ANTI-MASKING function
When masking condition continues more than 3 minutes, TROUBLE will be generated.
TROUBLE is generated after 20 seconds under the anti-masking test mode.
STD
LOW
ON
OFF
Teaching mode starts when both the separate box cover and the main unit cover are
attached.
Please be careful not to leave any object within 1 m from the unit.
ANTI-MASKING test mode
The trouble is output after 20 seconds.
Normal mode
The trouble is output after 3 minutes.
10 minutes 1 minute
Teaching
- 15 -