Optelec
Page 8 of 29
running on your external unit, e.g. an edit box in the messaging application. When
both of your units are ready, press Left Pan + Right Pan + Space. The transfer will
begin. The data will be entered word by word. The transfer rate has been set to
provide comfortable speed without compromising the correctness of the
transferred data.
Using the Clipboard while working with an external device
It is still possible to use the Clipboard even when your EasyLink 12 is connected
to an external device. By default, this option is disabled. To enable it, you need to
open the menu. First turn the EasyLink 12 on and immediately after pressing
space + dots 1 3, press Space + Control. The Braille display will show the battery
status. Using the Joystick Up/Down find option called “cbrd run off”. When it is
displayed on the Braille line, press Joystick Action to activate the option, and then
Joystick Down to change to “on”. Confirm your selection with Joystick Action. Now
you can exist the EasyLink menu by arrowing to the Exit option and pushing down
the joystick. From now on, you can run the Clipboard regardless of whether your
EasyLink 12 is connected or not to an external device. All you have to do is press
Left Pan + Shift + Dot 3 and you are ready to enter text to the Clipboard. The
EasyLink 12 will switch to an autonomous mode and the communication with an
external device is suspended until you exit the Clipboard.
BP Clipboard keystrokes:
Action
Keystrokes
Switch on Clipboard
Left Pan + Shift + dot 3
Exit Clipboard
Right Pan + Ctrl + dot 6
Delete (Backspace)
Left Pan + dots 1 2 3
Empty Clipboard
Left Pan + Right Pan + dots 1 2
3 4 5 6
Transfer data
Left Pan + Right Pan + Space
Pan left
Left Pan
Pan Wright
Right Pan
Top/bottom
Left Pan + Right Pan
