Optelec
Page 26 of 29
Using EasyLink12 with Talks
Setting Talks up to connect
First turn Talks off, and then set Bluetooth on your phone to On. Make sure your
phone is in discoverable mode.
Now turn your EasyLink12 on, and wait to hear the triple-beep that tells you
Bluetooth is active. Pair your phone with EasyLink12 using the passcode 1234.
If your phone asks: "Authorise device to make connections automatically?" answer
yes.
Once the two devices are paired, install the BP12 Braille driver on your phone. We
recommend that you install the driver on your phone's memory card.
Now restart Talks. Check on the Braille tab that "Braille" is set to "BP12 Driver" and
"Keep Braille on" is set to "Yes".
Your phone's output will now show on the EasyLink12.
To make sure you can read messages and notes on the Braille display line by line,
check that in the Advanced tab, the "Cursor Mode" setting is set to "Letters".
The main keystrokes you will need are:
Soft key left
space + shift
Soft key right
space + control
Star key
dots 3, 4
Hash or Pound key
dots 3, 4, 5, 6
Call
c dot 5
End call
c dot 4
Cursor Down
space + dot 4
Cursor Left
space + dot 3
Cursor Right
space + dot 6
Cursor Up
space + dot 1
Enter (Joystick Enter)
shift + space + control
Menu
space + dots 1, 3, 4
Repeat the last phrase
space, c dots 3, 4,
5, 6
Read the names of the soft keys
shift + control
Give b network status information
space + dots 2, 4, 5, 6
Switch between key echo modes
space, c dot 1
Uppercase letter announcement on or off
space, c dots 1, 2
Turn the NATO spelling alphabet on or off
space, c dots 1, 4
Switch between punctuation modes
space, c dots 1, 4,
5
Volume down
space, c dots 1, 5
Volume up
space, c dots 1, 2,
4
Slower speech
space, c dots 1, 2,
4, 5
Faster speech
space, c dots 1, 2,
