Opt Lasers ooznest WorkBee, Руководство по установке

Страница: 16 / 24

WorkBee Laser Upgrade Setup Guide
17 / 25
100%)
The first three commands should be placed at the beginning of the G-code file (in the header). The
fourth command should be at the end of file (in the footer). The “S” ommand has to e in aine oith
every G1 in order to set the laser power. To see a G-code example, please refer to
Appendix 1 .
First Job
First Job
1.Connect the PLH3D laser head. Put a piece of plywood on the table of your WorkBee CNC machine.
Move the X- and Y-axis to have the laser head above the bottom left corner of the plywood.
2.Using the PLH3D-6W Height Reference Tool, set the laser head 60mm a oae payooodʼs surfa e.