Charging and Battery Use
This unit has a built-in rechargeable lithium polymer battery. It
should be charged before use.
VOOC Rapid Charging
Connect the USB micro-B port of the HA-2(SE) to the
supplied VOOC Rapid Charger using the included USB A –
USB micro-B data and rapid charging cable. Plugging the
charger into a power outlet will begin charging the HA-2(SE)’s
battery, and the Charging Indicators on the side of the unit
will start to blink. It may take a few seconds to enter the rapid
charging mode, which is indicated by the Charging Indicators
quickly blinking. When the battery is almost full, rapid
charging will change to normal charging automatically, and
the blinking speed of the Charging Indicators will slow down.
Normal Charging
The unit can also be charged by connecting the USB micro-B
port to a USB port on a Mac or PC. The Charging Indicators
on the side of the unit will blink when the unit is being
charged. Rapid charging is not possible using this connection
method.
