Oppo DV-981HD, Руководство пользователя

Страница: 23 / 55

I N S T A L L A T I O N
19
o
Audio Setup Page > Digital Output
to “
Raw
”
o
Audio Setup Page > HDMI Audio
to “
Auto
”
Down-mix
Front Speaker
Center Speaker
Rear Speaker
Subwoofer
Channel Delay
5.1CH
Large
Large
Large
On
--- Speaker Setup Page ---
Digital Output
LPCM Rate
Audio Tone
Pro Logic II
Dolby Digital Setup
Channel Trim
Audio Delay
HDMI Audio
Raw
48KHz
00
05
Auto
--- Audio Setup Page ---
In this configuration you can enjoy all audio formats using the HDMI connection.
NOTE
HDMI is a wonderful thing. A single cable can transport both audio AND video from your DVD
player to your display. Be aware, however, that HDMI is an evolving standard, and there
could be compatibility issues. The OPPO DV-981HD supports HDMI 1.1 audio. A receiver
that supports HDMI 1.1 is required in order to play multi-channel audio for all formats,
including DVD-Video/Audio and SACD (SACD DSD audio converted to multi-channel PCM).
If the receiver supports HDMI 1.0 only, DVD-Audio and SACD will NOT be able to be sent via
HDMI. To utilize DVD-Audio or SACD, please see next section for multi-channel analogue
audio connection.
Multi-Channel Analog Audio to Receiver
If your DVD player is connected to an A/V receiver through the 5.1ch analog audio jacks using 6 RCA cables
(as described in “Method 4” on page 11), you can play all supported audio formats and listen to it with your
A/V receiver and surround systems. The following setup options are recommended:
•
Set the
Speaker Setup Page > Down-mix
to
“5.1CH”
.
•
Set the speaker size and subwoofer properly according to your actual audio hardware.
•
Enable or select the multi-channel analog inputs on your receiver
Down-mix
Front Speaker
Center Speaker
Rear Speaker
Subwoofer
Channel Delay
5.1CH
Large
Large
Large
On
--- Speaker Setup Page ---
Using the multi-channel analog audio output is necessary for playing DVD-Audio and SACD if your receiver
does not support HDMI multi-channel audio. This is absolutely worth it if you haven’t yet upgraded to a
receiver with HDMI audio. Truly discrete audio channels are a wondrous thing, so enjoy them if you can.
Coaxial or Optical Digital Audio to Receiver
If your audio connection is as described in “Method 5” on page 12 of this guide, and the A/V receiver support
Dolby Digital and DTS decoding, the following setup options are recommended: