Oppo DV-970HD, Руководство пользователя

Страница: 6 / 42

I M P O R T A N T I N F O R M A T I O N
2
Cautions
•
Please disconnect the power plug from the wall outlet if you are not going to use the player for a long
time.
•
Ensure that all audio/video cables are properly connected before plugging in the power plug. The
player is not disconnected from the AC power source as long as it is connected to the wall outlet,
even if the player itself has been turned off.
•
The acceptable power input range is AC ~ 100V-240V, 50/60Hz
•
Before turning on the power of the player, please adjust the volume level of TVs, audio system
speakers and amplifiers to the minimum. Adjust the volume as necessary only after normal playback
has started to avoid damage to your hearing and equipments.
•
Do not put the player near any high power loudspeakers so as to avoid any interference due to
vibration or magnetic fields.
•
Please put the player at a dry and well ventilated area. Do not put it near heat source, or expose it to
direct sunlight, mechanical vibration, humidity or excessive dust.
•
Before moving the player, take out any discs. Otherwise the disc may be damaged.
•
When moving the player from a cold place to a warm one, or vice versa, moisture may condense on
the laser pickup unit inside the player. Should this occur, the player may not operate properly. In
such a case please turn the power on for 1-2 hours (without disc) until the moisture evaporates.
•
Clean the cabinet, panel, and controls only with a soft cloth slightly moistened with water or a mild
detergent solution. Never use any type of abrasive pad, scouring powder or solvent such as alcohol
or benzene for cleaning.
•
Do not place objects filled with liquid, such as vases, on the player.
•
The AC power plug is used as the disconnect device, so the AC power plug shall always remain
readily operable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.