Oplink Communications
Chapter 5 Working Modes Setup Wizard
5.1. AP mode
In this default mode, the device can convert the wired
and wireless signal which is the center access point for few
clients (generally wireless network adapter). For example,
in a big hotel, connect the Router to the broadband access
port with the Ethernet cable and configure your computer
to obtain an IP address automatically and then you can
share the internet with others. Generally, the broadband
Router of the hotel has DHCP function, which can assign
IP address for clients.
This section guides you how to connect wireless client
to the access point, we will guide you step by step. Please
connect the device as follows.
Tip: Routers in hotels support DHCP function which can
assign IP addresses automatically. You only need to
configure you computer to obtain IP address and DNS
sever automatically to access the internet. (Setting ways
refer to 4.1.)
