4
5
4
11
Glue the table tennis ball (4) centred on the head mounting. Then glue
the two wiggly eyes (5) onto the head.
Please Note:
Paint the wooden parts so that they are better protected from water.
12
Feed the cables of the battery holder down through the hole in the
base plate (1a). Solder the connection as shown in detail. After che-
cking and inserting two 1.5V AA batteries, attach the battery holder to
the base plate with the supplied rubber band.
14
If the bottle neck is too long and thus no fixation in the holder is
possible, cut off a part of the bottle neck.
Detail
13
Attach two PET bottles (0.5 litres) as shown. The bottle is fixed by
screwing on the lid. Done!
Building Instruction 122.072
Recycling Rowing Boat
15
The paddles can also be mounted offset, making it a kayak.
2. Variant: Kayaker
