Opitec Hobbyfix, Руководство пользователя

Страница: 6 / 11

6
E109771#1
INSTRUCTIONS
36. Glue the rower on the seat as shown so
that he sits directly on the mechanism
37. The oars go first through the hand (
Screw eye ) then in the sawn gear, see
photo
Photo 36
Photo 37
39. Cut 2pieces x100mm from the cable
(4) and remove the insulation from the
ends ( ca 5mm ) Solder one cable to
one end of the battery holder and an
end of the other cable to the opposite
end of the battery holder.
The free cable ends can now be fixed
to the tabs on the solar motor Photo
39
Photo 39
40.When a 1.5volt battery is inserted the mechanism should turn the oars and arms
in a circular motion. Should the arm movement jam or be stiff check the joints
and adjust them until they move freely
Photo 38
38. Slide the connector block on the
wire for the oars (35mm ) so that the
handle of the oar cannot slide out of
the screw eye and gear ( see photo
36) Carry out the same technique
with the second oar