Opitec Grand Prix Racing, Руководство пользователя

Страница: 4 / 17

7 8
ø 4
9 10
ø 4
11
Instruction 101.658
Grand Prix Racing
Cut out the template for the rear spoiler (page 17) and stick it to the tin
sheet (5) with adhesive tape. Mark the position of the holes with the
piercer.
Drill through holes (ø 4) and then saw out the seat with the metal saw
blade jigsaw. File the saw edges with the workshop file.
Cut out the template for the construction (page.13) and stick it to the
tin sheet (3) with adhesive tape. Mark the position of the holes with
the piercer.
Drill holes (ø 3) and then saw out the structure with a metal saw blade
jigsaw. File the saw edges with the workshop file.
Bend the lower part (2) at the lateral bending edges 90 ° upwards as illustrated. Then bend the horizontal bending edges as shown in the side view.
Side View