Using the StarBright Display Unit
StarBright User Manual
22
3.4.2
Field Upgrade – Updating the StarBright Firmware
StarBright has all of the necessary infrastructure for field upgrading of the embedded software,
should the need arise. This is done through the USB OTG port that is found on the rear panel of
the instrument (see
).
To update the StarBright firmware:
1.
Download the latest StarBright firmware upgrade package from the Ophir website:
and copy it to your target directory.
2.
Run the upgrade executable and follow the on-screen instructions.
Figure
3-9 StarBright Field Upgrade Wizard
3.4.3
Clock Settings
The StarBright is equipped with a real time clock which shows the date and time. This clock also
allows the StarBright to query the sensor attached and notify you if the sensor is due for
calibration. You can change the
To set the real-time clock of the instrument:
1.
Disconnect the sensor.
2.
Use the up (
↑
) /down (
↓
) Navigation keys to select/highlight the
Date and Time
parameter
and press the
Enter
key.
Figure
3-10 Real Time Clock Settings