22
Introduction
Perfect Pick User Manual - OPEX Corporation
OPEX software
The OPEX software is used for troubleshooting the Perfect Pick system. In
diagnostics, it shows the status of the iBOTs and their locations, as well as the
locations of the totes in real time. Though primarily used by the OPEX
technician, there may be situations where you need to use this software, such
as to park the iBOTs.
How to park the iBOTs
1
At the Perfect Pick controls, if the Diagnostics screen is not displayed, click
the
Diagnostics
button.
Note:
If you are on the Run Screen, clicking the
iBOTs
tab will also display
the following information.
Figure 7: Diagnostics screen
2
This screen offers three buttons to park the iBOTs at different locations:
Park Top
,
Park Vertical
, or
Park Bottom
. Click the appropriate button.
Note:
If functional iBOTs are sent to wait at the top of the machine, you will
have approximately 2 hours before they lose their charge. The
Conserve
iBOT Power
button in Diagnostics makes the iBOTs stop sending
constant status updates to the machine to save energy.
CAUTION
CAUTION:
The actual removal and installation of iBOTs should only be
done by a qualified Opex technician. These instructions are provided for
informational purposes only.
Diagnostics
button
Park iBOTs
