3
3. Warnings
3.1 Siderails
Use this mattress with side rails that meet bed rail regulations (BS EN 60601-2-
52:2010) to ensure that the gap between the side rail and the top of the mattress
is not large enough to pose risk of head or neck entrapment. Failure to do so could
result in serious patient injury or death. If applicable, adhere to facility or local
guidelines regarding entrapment regulations.
3.2 DO NOT Disassemble
contact Opera
2.3 Flammability Hazard
exists. This device draws air from the surrounding environment. Thus, cigarette
smoking may damage internal components.
2.4 Disinfection Between Patients
This system should be disinfected thoroughly between patients in order to avoid
cross contamination.
2.5 Weight Capacity
Verify that the patient’s weight, accessories, and this mattress replacement system,
do not exceed the bed frame’s manufacturer’s recommended weight capacity.
2. Safety Precautions
2.1 Proper Operation
To ensure proper operation, please inspect and verify that all parts are set up
properly and are anchored securely to the bed system. Verify that the mattress
replacement system does not interfere with the bed frame function. Do not place
anything on top of the power unit. Make sure power cord set is underneath bed frame
and does not pose a hazard.
2.2 Use of Linens
It is recommended to limit bed linens to a single layer in order to allow moisture
recommended for use with this mattress system.
Impulse Auto Mattress Instructions and Technical Specification
Care on 0333 222 8584.
