Opera 4 IP System Manual
Page 15
3
3
.
.
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
e
e
t
t
h
h
e
e
s
s
y
y
s
s
t
t
e
e
m
m
f
f
r
r
o
o
m
m
t
t
h
h
e
e
B
B
r
r
o
o
w
w
s
s
e
e
r
r
3.1.
Browser based programming
This section describes how to connect to the Browser interface on the Opera 4 IP and enter the
basic configuration information needed for the operation of the system. Once you have
successfully connected to the browser, the full range of features offered by the system can be
programmed. The browser interface also allows a software upgrade either locally by uploading it
from a PC or remotely by requesting it from a remote management server.
There is a
Help
Button on each feature-programming page. On clicking the Help button, the
Help page appears on screen giving an explanation of the feature and indicating how to
program the feature.
Programming is carried out from a PC using any standard Internet Browser, e.g. Netscape
Navigator or Microsoft Internet Explorer, that is connected to the system either directly on the
Ethernet Port or through a Local Area Network (LAN).
3.2.
Enter Browser Based Programming
To use Browser Based Programming, the system and the PC must be on the same network
with an IP connection established between them as described above.
Open the Internet Browser and type the IP address of the system.
The default address is - http://192.168.1.250
The IP address of the system can be checked as described in section 2 above.
Once the IP connection is established, the following login page will be displayed:
http://192.168.1.250
