Opera 4 IP System Manual
Page 10
2.6.
Three step Set-up flow chart
Plug the system into the LAN, Point a PC browser
at the systems IP address. (default
http://192.168.1.250
)
User name: admin
Password: 1000
Click on the link
IP Addresses
in the
IP Settings
panel.
Enter your gateway IP address in the
Default
Gateway
field, and click save.
Change the Gateway IP address of the system
The system has a
default IP address
of 192.168.1.250
and mask of
255.255.255.0
I
I
s
s
t
t
h
h
i
i
s
s
o
o
k
k
f
f
o
o
r
r
y
y
o
o
u
u
?
?
The LEDs flash during the initiation sequence and finally just
the power LED flashes.
STEP 1. Power the Opera system up
To hear the systems current IP address or Subnet
mask.
1. Plug an analogue phone into one of the
analogue ports
2. Dial
**01#
for the IP address or
**02#
for the
Subnet mask. 3. The system will call out the
current setting.
To change the systems current IP address or
Subnet mask.
1. Dial
**01*DDD*DDD*DDD*DDD#
for the IP
address or
**02*DDD*DDD*DDD*DDD#
for the
Subnet mask,
where DDD represents the elements
of the IP address or subnet mask, i.e. dial
**01*192*168*0*100# to set the IP address to
192.168.0.100 or **02*255*255*255*254# to set
the subnet mask to 255.255.255.254
Change the IP address of the system
The system has
default Gateway IP
address
192.168.1.254
.
Is this ok for you?
No
What you need to know
before you start:
1. The IP address range of the
LAN.
2. The IP address of the Router
on the LAN.
3. Does you Router Support
UPnP and is it enabled?
No
Yes
Yes
