background image

 

 

 

 

Power Lines 

In case of connecting a tuner, an outdoor antenna should be located away from power lines. If 
an  outside  antenna  is  connected  to  the  system,  be  sure  the  antenna  is  grounded  so  as  to 
provide some protection against voltage surges and built up of static charges. 

Lighting 

Consonance  hi-fi  system  can  be  damaged  by  lightning.  Power  amplifiers  are  particularly  at 
risk  and  therefore  should  be  turned  off  when  there  is  risk  of  lightning  strike.  For  complete 
protection all mains plugs and any aerial cables should be disconnected when not in use. 

Cleaning 

Never  clean  with  furniture  polish,  benzene,  or  volatile  liquids.  Dust  periodically  with  a  clean, 
soft paint brush. Fingerprints can be removed with a moist polishing cloth.  

Speaker Impedance 

For best performance, the load presented by the  speaker has  to  match the Cyber-880-AM

’s 

output impedance per channel. Refer to the speaker’s manufacturer handbook for information 
on the nominal impedance. The Cyber-880-AM is factory set to match the speakers at 8 ohms 
and 4 ohms. 

Ventilation 

The  equipment  should  be  situated  so  that  its  location  or  position  does  not  interfere  with  its 
proper ventilation.  

1.  The equipment  must not be placed on bed,  sofa, or similar surfaces, that may block the 

ventilation openings,  

2.  The equipment must not be placed in a built-in installation, such as a bookcase or cabinet 

that may impede the flow of air.  

3.  The  equipment  should  be  situated  away  from  heat  sources  such  as  radiators,  heat 

register,  stoves,  or  other  electronic  appliances  that  produce  heat.  This  equipment  is  not 
intended for commercial use. 

Water and Moisture 

The equipment should not be used near water, e.g., near a bathtub, washbowl, kitchen sink, 
laundry tub, in a wet basement, or near a swimming pool etc. Similarly, do not placed objects 
filled with liquid, such as vases on top of the equipment. 

Содержание Cyber880 AM











Отзывы: