D110P/D110E on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
12
D110P/D110E. If it has been recognized,
"
communication controller
"
will be displayed in the output information like that:
01:02.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device 79de:0001
Control: I/O+ Mem+ Bu SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 225
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at dcdff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-
,D2+,D3hot+,)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Figure 3 Hardware detection
If D110P/D110E is not recognized by the system, you have to power off
and take out the card, then try to insert it into other PCI or PCI-E slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let’s run
"
yum
install XX
"
(XX stands for the dependency’s name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
