Opentech ODS 3500CI Скачать руководство пользователя

Страница: 14 / 16

Free To Air / Common Interface Digital Satellite Receiver

UPGRADE BY SATELLITE

1.A. The default satellite and transponder will

be automatically selected for download.

Please check if LNB and DiSEqC
settings are correct and press “ OK ”
button to find new software.

1.B. If the default channel found, the

following message appears. Otherwise,
go to step 1.A.

1.C. Then the receiver automatically scans

new software. It takes about maximum

5 minutes.

1.D. If new software found then the list of

new software and data will be displayed.
Select [Yes] or [No] for each item to
upgrade or not and press “ OK ” button
to start upgrade.

If you do not want to upgrade, press
“ EXIT ” key to return previous menu.

1.E. Receive and update new s/w. It takes

about 20 to 50 minutes.

You can stop upgrading at anytime
before download completes (e.g. before
progress bar reaches 100%).

But if download completes, you should
not switch off power until the message
as next step (1.F.) appears.

1.F. When download completes

successfully, you can see the message
in the left figure. At this moment,

you have to reboot the receiver to run
with new s/w.

Содержание ODS 3500CI

















Результаты поиска

Содержание ODS 3500CI

Отзывы:

Похожие инструкции для ODS 3500CI

Бренды по названию

Популярные бренды

Opentech ODS 3500CI, Руководство пользователя

Результаты поиска

Содержание ODS 3500CI

Отзывы:

Похожие инструкции для ODS 3500CI

Бренды по названию

Популярные бренды