Free To Air / Common Interface Digital Satellite Receiver
MENU OPERATION
19
Free To Air / Common Interface Digital Satellite Receiver
MENU OPERATION
18
3. C.Parental Controls
This function prevents children or unauthorized
persons from watching programs.
Also you can change PIN(Personal Identification
Number) code.
Select
“
Parental Control
”
menu in the
“
Receiver
Settings
”
menu, and the following screen will be
displayed.
Lock or unlock your receiver. When receiver is locked, the PIN code will
be required whenever you turn on the receiver.
Lock or unlock the menu of your receiver. When menu is locked, the PIN
code will be required whenever you enter the menu items.
Set the level of maturity rate that the receiver will show the channels
without asking PIN code.
You can change your PIN code from the previous one in this menu. If
you forget the PIN code, you have to contact the distributor to find out it.
The factory default is “0000”.
Receiver lock
Menu lock
Maturity Rate
Change PIN code
Select the time mode of your receiver. In Auto mode, your receiver
will use the information from the satellite as timereference. In
manual mode, you can set the time of your receiver manually.
Set the time offset from the reference time.
Useful in auto mode only.
Set the current time manually. Useful in manual mode only.
Set the time when the receiver will be automatically turned on
Set the time when the receiver will be automatically turned off.
Time Mode
Time Adjustment
Current time
On time
Off time
3.B. Time Settings
You can change the time of your receiver and also
switch on/off the timer function in this menu.
Select “Time Settings” item in the “ Receiver Settings”
menu and the following screen will be displayed.
3. D. RECEIVER UPGRADE
You can upgrade the software of this receiver through serial port when the new software is
released.
Please contact the distributor for receiver upgrade.
Distributor supports you useful information and new software for the receiver.
3. E. FACTORY DEFAULT
This is to restore the factory set values in case the user has encountered some problems
after changing any new values of channel data and others which may be in error.
Select
“
Factory Default
”
menu in the “ Receiver Settings
”
menu and press
“
OK
”
key.
If you want to continue, select
“
Yes
”
cell.
The receiver will be reset to settings automatically.
Please note that the
“
Factory Default
”
procedure may take a few minutes.
