Opengear CES-8940, Руководство пользователя

Страница: 28 / 48

3–4 • Configuration CES-8940 User Manual (Iss. 02)
Card-edge LEDs Overview
Basic LED displays and descriptions are provided in Table 3.2 .
Rear Module LEDs
Each RJ45 connector on the 8320AR-056 rear module include two LEDs that report the ethernet
communication activity and speed for the card. Refer to Figure 3.3 for LED locations.
Table 3.2 Card-edge LEDs
LED Color Display and Description
PWR
Green
When lit green, this LED indicates that the card is functioning
normal and that no anomalies have been detected.
Flashing Green
When flashing green, this LED indicates that the bootloader is
currently running.
Yellow When lit yellow, this LED indicates that the CPU is booting.
Red
When lit red, this LED indicates that the card is powering on or
there is a fault condition.
Off When unlit, this LED indicates a lack of power to the card.
SFP #
These LEDs are not implemented.
PORT #
SPEED
a
a. Note that Ports 5 and 6 are not implemented.
Green When lit green, this LED indicates the port speed is at 1Gbps.
Orange When lit orange, this LED indicates the port speed is at 100Mbps.
Off When unlit, this LED indicates the port speed is at 10Mbps.
PORT # LINK/
ACTIVITY
a
Green
When lit green, this LED indicates a valid link is established on the
port.
Flashing Green
When flashing green, this LED indicates communication activity is
occurring.
Off
When unlit, this LED indicates an invalid link is detected. Verify
the cable connection on the rear module port and your network
connections.
Figure 3.3 8320AR-056 Rear Module LEDs
Ethernet Port 4 Speed LED
Ethernet Port 4 Link/Activity LED
Ethernet Port 3 Link/Activity LED
Ethernet Port 3 Speed LED
Ethernet Port 2 Link/Activity LED
Ethernet Port 2 Speed LED
Ethernet Port 1 Link/Activity LED
Ethernet Port 1 Speed LED