OpenEye OE2-E12004 Скачать руководство пользователя страница 4

iv 

27717AH 

 

IMPORTANT SAFEGUARDS 

1. 

Read Owner’s Manual

 – After unpacking this product, read the owner’s manual carefully, and follow all the operating and other 

instructions.

 

2. Power 

Sources

 – This product should be operated only from the type of power source indicated on the label. If not sure of the 

type of power supply to your home or business, consult  product dealer or local power company 

3. Ventilation

 – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to 

protect it from overheating, and these openings must not be blocked or covered. The product should not be placed in a built-in 
installation such as a bookcase or rack unless proper ventilation is provided or OpenEye’s instructions have been adhered to. 

4. Heat

 – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that 

produce heat. 

5. 

Water and Moisture

 – Do not use this product near water. Do not exceed the humidity specifications for the product as detailed in 

the Appendix section in this manual 

6. Cleaning

 – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp 

cloth for cleaning. 

 

7. 

Power Cord Protection

 – Power-supply cords should not be routed so that they are likely to be walked on or pinched by items 

placed against them, paying particular attention to cords at plugs, receptacles, and the point where they exit the product. 

8. Overloading

 – Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire 

or electrical shock. 

9. Lightning

 – For added protection for this product during storm, or when it is left unattended and unused for long periods of time, 

unplug it from the wall outlet. This will prevent damage to the product due to lightning and power line surges. 

10. 

Object and Liquid Entry Points

 – Never insert foreign objects into the DVR, other than the media types approved by OpenEye, 

as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any 
kind on the product. 

11. Accessories

 – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious 

personal injury and serious damage to the product. 

12. 

Disc Tray –

 Keep fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury. 

13. Burden 

– 

Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious 

damage to the product. 

14. Disc

 – Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury 

and product malfunction. 

15. 

Damage Requiring Service –

 Unplug the unit from the outlet and refer servicing to qualified service personnel under the following 

conditions: 
When the power-supply cord or plug is damaged. 
If liquid has been spilled, or objects have fallen into the unit. 
If the unit has been exposed to rain or water. 
If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the 
operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a 
qualified technician to restore the unit to its normal operation. 
If the unit has been dropped or the enclosure has been damaged. 
When the unit exhibits a distinct change in performance - this indicates a need for service.

 

16. Servicing 

 Do not attempt to service this product unless instructed to by an OpenEye engineer. Opening or removing covers may 

expose the user to dangerous voltage or other hazards. Refer all servicing to qualified personnel. 

17. 

Replacement Parts –

 When replacement parts are required, be sure the service technician has used replacement parts specified 

by OpenEye or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or 
other hazards.

 

18. 

Safety Check –

 Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to 

determine that the unit is in proper operating condition.

 

Содержание OE2-E12004












































































Отзывы: