48
Use the Event Setup menu to configure events per channel, alarm notifications, and manage e-mail
notifications. Access the Event Setup menu in the SETUP menu.
General Settings
Internal Buzzer allows you to enable or disable the audible beep from the recorder when alarm events
occur. Set to
On
to enable the beep; set to
Off
to disable the beep.
This option will show an icon on the Live screen when an event is triggered (motion or sensor).
This option will determine how long an event will be recorded after an event is triggered (motion or
sensor).
This option will cause the recorder to display the channel full screen when an event has been triggered
(motion or event).
Per Channel Configuration
Per Channel Configuration allows you to configure alarm events for video loss, motion detection, and
alarm inputs and outputs.
1.
Click the
Setup
button on the hover menu.
2.
Click
Schedule Setup
, and then click
General Settings
.
3.
Click the Global Configuration drop-down and select
Motion / Event
.
4.
Select
Alarms Setup
, and then
Per Channel Config
.
5.
Click the
Motion Detection
button so that the button is in the green ‘
ON
’ position.
6.
Select Motion Detection in the
Setup
menu and configure the detection field, level, and sensitivity
for each camera.
Copy Motion Recording Settings to other Camera Channels
1.
To use these settings on other camera channels, click
Copy Event Settings.
2.
Select the camera channels to copy these settings to, and then click
Confirm
.
3.
Close
Per Channel Configuration.
