34918AG
37
MAINTENANCE
On the Maintenance page you can export the cameras current configuration, or import the
configuration for a camera. Use the factory default page to reset the IP Camera to factory default
settings if necessary.
Note
Do not import configuration files from different models of cameras.
Configuration
Export Configuration:
1.
Click Export Configurations.
2.
The .bin file will be saved.
Note
The default location for exported configurations is C:\
Upload (Import) Configuration:
1.
Click Browse in the Configuration Import box.
2.
Select a .bin file that you want to import.
3.
Click Import.
4.
Click Yes when prompted that the import will cause a system reboot.
Factory Default
There are two factory default settings available: Full Restore that restores default settings including
network settings, and a Partial Restore that restores default settings excluding network settings. A
system reboot is also available; this preserves all settings.
Note
If a Full Factory Default is used, you will need to use the Network Camera Manger to find the
desired camera(s) again.