
34918AG
15
Viewing a Network Camera
1.
Click Load in the row of the desired camera.
2.
Enter the Username and Password for the camera. The username and password are case
sensitive. It is strongly recommended that the password be changed after the initial setup to
prevent unauthorized access. The default username and password for OpenEye IP cameras
are as follows.
Username – admin
Password – 1234
3.
The viewer software is now opened in Internet Explorer.
Note
The viewer software will install automatically the first time you connect to the camera. If your
internet browser does not install the viewer software, check the security settings or ActiveX
controls and plug-in settings. If your internet browser asks for permission to install the ActiveX
control, you must allow the ActiveX control to continue the installation. If you are prompted to
allow an add-on, click Allow.
4.
You can now configure your camera using the Viewer Software. For more information on using
Viewer software, please see the user manual for your camera.