OpenEye OE-C1011D4 Скачать руководство пользователя страница 34

Страница: 34 / 42

Trigger Actions

Alarm Output

- This setting is the alarm output interface linked to motion detection alarm.

Note

: When an alarm is reported, the camera triggers alarm output so as to trigger actions by a

third-party device.

Record Video to SD Card -

With Record Video to SD Card selected, the camera will automatically

upload video to the microSD card when an alarm is triggered.

Note

: This option is only available if the camera has a microSD card installed.

Upload to FTP

- With Upload to FTP selected, the camera will automatically upload snapshots to

the specified FTP server when an alarm is triggered.

Note

: Make sure you have completed FTP and Snapshot before using this function.

Trigger E-mail

- With Trigger E-mail selected, the camera will automatically send snapshots to the

specified E-mail address when an alarm is triggered.

Note

: Make sure you have completed E-Mail setup before using this function.

Snapshot to SD Card -

With Snapshot to SD Card selected, the camera will automatically upload

snapshots to the microSD card when an alarm is triggered.

Note

: This option is only available if the camera has a microSD card installed.

Enable Schedule

Select the check box and set the start and end times during which motion detection alarm is

enabled. You can directly drag the mouse to draw a plan and click Edit to edit time periods in the

table. The camera reports alarms during the specified period(s) only. You can select from

Monday to Sunday and set four periods for each day.

Save

Alarm Input

To configure Alarm Input:

Select

Alarm

Alarm Name

and

Alarm ID

Select

N.O.

N.C.

according to the type of the third-party alarm input device (For example, if the

third-party alarm input device is normally open, you need to select N.O. here) so that the camera

can receive alarm information.

Set actions to be triggered by an input alarm and the plan. For the detailed steps, see the

descriptions of triggered actions in Configuring Motion Detection Alarm.

Save

Содержание OE-C1011D4











































Результаты поиска

Содержание OE-C1011D4

Отзывы:

Похожие инструкции для OE-C1011D4

Бренды по названию

Популярные бренды

OpenEye OE-C1011D4, Руководство пользователя

Результаты поиска

Содержание OE-C1011D4

Отзывы:

Похожие инструкции для OE-C1011D4

Бренды по названию

Популярные бренды