![background image](http://html1.mh-extra.com/html/open-e/nas-xsr-enterprise/nas-xsr-enterprise_manual_1639720062.webp)
62
5.
The ISO-Files which include in update file must be burned on a CD with your
favorite Burning software. (For example: Nero Burning ROM - option: “Burn
Image”, etc.)
6.
In order to re-flash the module, please install CD-ROM as Secondary-Master and
DOM (disk-on-module) as Primary-Master.
USB CD-ROM can be used as well.
7.
Set the BIOS to boot from CD-ROM drive.
8.
Boot from the ISO-CD and wait until prompt: “Update complete, Please Remove
CD and restart”
9.
After re-fleshing, please reset the BIOS to boot from Primary-master HDD.
Updating the system may take about 10 minutes.
Please remember that making an update is activity that cannot be
stopped in any way. We strongly recommend to update system
when UPS is connected.
Function: Update downloader
With this function you can check if there is new update available and download it.
In order to download a new update you need to be registered at Open-e.com.
You also have to remember to setup correct DNS and Gateway address in
Setup
Æ
Network branch.
5.2.3.5
Backup
If more than two Open-E NAS-XSR servers are in use, you have the option to
synchronize shares between them. Please configure the shares, providing
“Source share”, destination IP, destination share, and login and password.
Function: “Synchronize options”
This function allows you to set additional parameters for synchronize. Available
settings are:
•
Log synchronization errors:
If you enable this feature every synchronization
error will be logged. If you will also enable sending logs via e-mail they will be
also sent by e-mail. This feature is enabled by default.
•
Synchronize whole files
: If you enable this feature each changed file will be
send whole not only the changed part of file. This can fasten synchronization
when using 1 Gb or 10 Gb network cards. This feature is disabled by default.
Содержание NAS-XSR ENTERPRISE
Страница 1: ...Manual Ver 3 04 May 11 2006...