![background image](http://html1.mh-extra.com/html/open-e/nas-xsr-enterprise/nas-xsr-enterprise_manual_1639720012.webp)
12
If the network has a DHCP server, Open-E NAS-XSR should gain access to the IP
settings automatically. If that is the case, you can proceed at 4.3. If your network does
not have a DHCP server, Open-E NAS-XSR will start with the default settings: IP
address 192.168.0.220 and subnet mask 255.255.255.0.
You can change these values again by typing in the following key combination: left
CTRL, left ALT and N. You can select a different IP address now. All other available
functions on of the console will appear after pressing F1 key (see below).
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− Η
elp
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
You can use below key sequences (C-means ‘Left Ctrl’,A-‘Left Alt’)
C-A-N
– to edit static IP addresses
C-A-P
– to restore default factory administrator settings
C-A-I
– to restore default factory IP configuration
C-A-T
– to run Console Tools
C-A-X
– to run Extended Tools
C-A-W
– to run Hardware Configuration
C-A-H
– to display hardware and drivers info
F2
- to display all network interface
F5
– to refresh console info
C-A-S
– to shutdown the system
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−− (100 %) −−−
<
EXIT >
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
After a connection has been established, all settings can also be changed remotely
via the web browser. If your network requires it, the address of the standard gateway
and the broadcast address can be changed.
For additional information, please read the chapter “Functions of the console
display.”
4.3
Logging into Open-E NAS-XSR ENTERPRISE
You can establish a connection to Open-E NAS-XSR from every network computer. To
establish this connection, use a browser (e.g. Microsoft Internet Explorer) and enter
the IP address or the name of the computer hosting the NAS-XSR server into the URL
entry line: https://192.168.0.220 (standard address) or https://ancom (this name can
be changed in the installation of Open-E NAS-XSR).
For security reasons, Open-E NAS-XSR uses the encrypted SSL protocol
(https).
You will now be asked for verification of the encryption certification. Since Open-E
NAS-XSR does not allow for creating shares on the Internet but only on the Intranet,
there is no need for global certification by an authorized body. You can accept the
certificate for the session only, but also for all future use.
Now you have to accept the license in order to use the Open-E software and you can
choose the language you want to use.
Содержание NAS-XSR ENTERPRISE
Страница 1: ...Manual Ver 3 04 May 11 2006...