©Copyright by Opale-Paramodels 2013 v1.0
Page
4
sur
7
2.
Frame assembly
In the zipping bag, take the following items :
-
Side frame
-
Motor frame
-
Medium frame
-
Lower frame
-
10 screw CHC M3-8
-
10 nuts M3
-
10 washer M3
Mount the motor / medium/ Lower and a side frame as shown
Place an adhesiv tape on the lower plate for fixing your battery (velcro tape
not provided in this kit)
Then, use the CHC M3-8 screw with one nut and washer. Tighten them
softly.
One time the side frame is tighten, put the 2
nd
side frame and do the same
mouting with the hardware. Tighten all strongly.
Take the following items :
-
2x servomotosr (features 12*23mm)
-
4 screws CHC M3-8
-
4 nuts M3
Insert a servomotor on the side frame and tighten it with 2x CHC M3-8 and
nuts
Do the same with the opposite side