6
7)
Hang up the heater on the wall with its two slots getting into the hooks. Then tighten two spacers at bottom of the
heater to wall with two screws. Fig.7
Wall Wall
Fig. 7 Screw
5.
Operation
NOTE:
It is normal for the heater to emit some odor when it is turned on for the first time, or after having not been used for a
long period of time. This will disappear when the heater has been on a short while.
1)
Choose a suitable location for the heater, taking into account the safety instructions above.
2)
Insert the plug of the heater into a suitable outlet.
3)
Turn the thermostat knob fully in a clockwise direction to the maximum setting.
4)
Turn on the heating elements by means of the rocker switches on the side of the heater. When the heating
elements are on, the heat output is 1000W. Fig.8
Rocker switch
Power cord
Thermostat
Fig. 8-a Feet
ASD540
