4
REMINDING: there are 2 corresponding holes at the base, the 2 pillars at the seat need to pass
through these 2 holes when assembly the base onto the fans.
USE
Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the
power cord is damaged, it must be replaced by the manufacturer or a competent qualified
electrician or a person with similar qualifications, in order to avoid any risk.
Timer
: This appliance has a timer for automatic switching off at the end of the time set; to set the
time turn the timer knob (A) clockwise to the position corresponding to the desired operating time
(0-120 min.); in order to operate the appliance in a continuous manner, and to therefore exclude
use of the timer, turn the knob anticlockwise to the “ON” position.
Operation
After setting the timer:
-
To switch the appliance on, press the speed switch button (B)
-
0 = Off
1 = Speed minimum 2 = Speed medium 3 =
Speed maximum
-
To activate oscillation (right-left), press the OSC button(C).
To switch off the appliance, press the “0” button of speed witch knob(B) or turn the timer knob(A)
to the “OFF” position, and then remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the socket.
CLEANING AND MAINTENANCE
Attention
: before normal cleaning, remove the plug from the socket.
•
Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.