3
•
Before connecting the appliance, check that the voltage values shown on the data plate
correspond to those of the electricity supply network. In the event of incompatibility between the
electric outlet and the plug of the fan, have the outlet replaced with another more suitable type
by professionally qualified personnel, who will make sure that the section of the wires of the
outlet is appropriate for the absorbed power of the fan. In general, the use of adapters or
extension cords is not recommended; if their use is indispensable, they must conform to existing
safety standards and their current capacity (amperes) must not be less that the maximum of the
appliance.
•
The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
•
To not place the appliance near sinks or other container of liquids (minimum distance of 2
meters) to avoid the risk of it falling in.
•
Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the
air intake grille; make sure that the front is free of unstable materials (dust, etc.).
•
Make sure that the electric cord is not touching rough, hot or moving surfaces and not twisted or
wrapped around the appliance.
•
Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane (the
appliance could upset).
•
In the event of a breakdown or poor operation, turn the fan off and ask for professionally
qualified help.
ASSEMBLY
Attention
: the fan can only be used if complete with the support base (base1 and base 2).
Attention
: always unplug the appliance before you assemble.
To assemble it, refer to figure: positioning first the base1 (D) then the base 2 (E) on the body,
making sure to lock with 4 screws supplied (F);
A. Timer Knob
B. Speed switch button
C. Oscillation button
D. Base 1
E. Base 2
F. Attachment screws
A
B
C