Oplink Communications
2 / 3
II. Installation
(1)
Usage scenario:
•
Indoors and away from direct sunlight.
•
Away from extreme temperature sources and large metal objects.
(2)
Operation
:
•
Unscrew the screw to open the back cover of Remote control.
•
Insert the battery noting the polarity (A23 battery); Slide back the
cover and screw fastening with the front cove.
III. User Instruction& Workflow
(1)
Press “
” once to set arm mode of the system.
(2)
Press “
” once to set disarm mode of the system.
(3)
Press “
” once to send an emergency alert to the system.
(4)
If RMC1300 is in low battery status(9.6
±
0.4V), it will report a message to
the system along with the control signal generated when one of the buttons
is pressed. Please change the battery then.