Ooni Karu Gas Burner FSD, Руководство пользователя

Страница: 22 / 56

20
Regulator
Regulators will vary depending on region.
Patio gas regulator
This is a push-on gas fitting. Ensure that the black switch
is in the horizontal position. Depress the button located
below the black switch and press the regulator on to the
tank valve until it locks into place.
POL gas regulator
T his is an anticlockwise threaded gas fitting. Ensure the
tank is fully turned off and screw the regulator on to the
gas tank valve fitting until tight.
• The appliance must be installed at least 1 meter from any flammable materials.
• The oven should be placed on a non-flammable, stable and flat surface.
• Make sure your oven is placed in an area that will not be affected by adverse weather.
• When the diameter of the injector is 0.76mm use the provided 37mbar regulator with Propane LPG cylinder.
• Appliance only to be used with Propane LPG. Minimum cylinder capacity 4kg maximum cylinder capacity 13kg.
• Use a suitable provided regulator certified to EN 16129 and a flexible hose certified to EN 16436.
• The length of the hose must be no more than 1.5 meters. Worn or damaged hose must be replaced. Ensure that the
hose is not obstructed, kinked, or in contact with any part of the oven other than at its connection.
• The gas supply hose should be checked periodically and should replaced if damaged and at least every two years.
• Your countries national requirements will advise you how often to replace the hose. Regularly review these requirements
for your country.
• In the case of blocked venturi immediately turn off burner unit, turn off gas supply, disconnect gas supply and wait until
cooled to removed from oven.
• Ensure the appliance is clear of debris before every use. If any debris does build up use a brush to remove this when
appliance has cooled.
Gas Safety Information