Onyx RX-20, Руководство оператора

Страница: 7 / 24

7
•
NEVER allow children to play on or around the machine.
•
NEVER carry passengers on the machine.
•
Always follow safety and traffic rules.
•
Report machine damage or faulty operation immediately.
•
Observe the mixing ratio and processing instructions on the chemical vessel.
•
In areas that are too dark to safely see the controls or operate the machine unless
operating / headlights are turned on.
•
In areas with possible falling objects unless equipped with overhead guard.
FOR SAFETY: 4. Before leaving or maintaining the machine:
•
Stop and place the machine on a stable and flat surface.
•
Shut down the machine.
•
Remove the key.
FOR SAFETY: 5. When repairing and servicing the machine:
•
Avoid moving the parts. Please do not wear loose jacket, jewelry, shirt or over sleeves.
•
Before conducting service on the machine, please first disconnect the battery wiring.
•
Block machine tires before jacking machine up.
•
Jack machine up at designated locations only. Support machine with jack stands.
•
Use a hoist or jack that will support the weight of the machine.
•
Do not push or tow the machine on inclines with the brake disabled.
•
When treating battery or battery wiring, please wear protective gloves and eye pro-
tection.
•
Avoid contacting battery acid.
•
Do not hose down or spray this machine with high pressure water.
•
Use the replacement parts provided or recognized by the manufacturer.
•
All maintenance must be carried out by qualified maintenance personnel.
•
Relevant personal protective equipment (PPE) should always be worn when servicing
the machine.
•
Do not revise the original design of the machine.
FOR SAFETY: 6. When transporting the machine:
•
Shut down the machine. Remove the key.
•
Drain tanks before loading.
•
Lower scrub head and squeegee before tying down the machine.
•
Use a recommended ramp when loading/unloading into/off truck or trailer.
•
Use ramp, truck or trailer that will support the weight of the machine and operator.
•
Use a winch. Do not push the machine onto/off the truck or trailer unless the load
height is 380 mm (15 in) or less from the ground.
•
Block machine tires.
•
Tie machine down to truck or trailer.
•
Use tie-down straps to secure the machine to truck or trailer