background image

4

PARTS ORDERING

When ordering the replacement parts, please refer to the ONYX website at www.onyxsolutions.com. Use 

of the published Illustrated Parts Lists (IPL’s) to identify the correct part number required is required to 

support accuracy of parts ordering.

Machine IPL’s can be found at the top of the SHOP page of the ONYX website. Before matching parts 

or accessories, please firstly determine your machine model and serial number. You can order parts and 

accessories from any authorized service center or dealer by telephone at 704-827-9368, or email us at 

[email protected]

.

WARRANTY CLAIMS

ONYX Warranty Statement (policy) and Warranty Claim form can be found on the SUPPORT page of the 

ONYX website, 

https://www.onyxsolutions.store/support

.

TECHNICAL SUPPORT

Technical support is available by submitting a HELP TICKET on the CONTACT US page of the ONYX website, 

https://onyxsolutions.odoo.com/contact

.  

PROTECT THE ENVIRONMENT

Please abandon the old machine components such as packaging material, battery, 

etc. and toxic liquid such as anti-freezing agent and oil according to your local regu-

lations on waste disposal and on the premise of maintaining environmental safety. 

Please ensure to carry out the recycling well.

12703 Commerce Station Dr • Suite 200
Huntersville, NC 28078
704.827.9368

Содержание RX-20

























Отзывы: