Onwa KV-300, Руководство оператора

Страница: 29 / 38

if this function is active, on the display ON will appear; while if it's disabled,
the display will show OFF . Select the desired setting.
To return to radio mode, push PTT , select EXIT in every menu or wait for 1
second and the radio will automatically exit.
10.6 Display/keypad backlight.
According to the environmental conditions you can adjust the display/keypad
backlight.
Hold down
MENU/SELECT
until
DSC CALL
appears on the display
Scroll the list of functions with the UP/DOWN keys
Select SYSTEM and push MENU/SELECT as confirmation
Scroll again the list of functions with the UP/DOWN keys
Select BACK LIGHT and confirm by pushing MENU/SELECT .
Choose the desired backlight level (from 0 to 3).
To return to radio mode, push
PTT
, select
EXIT
in every menu or wait for 1
and the radio will automatically exit. minute
10.7 Band Edit
This function may be activated only with the optional programming kit PRG
KV-300.
It allows the selection of the following bands:
USA-CANADA-INTERNATIONAL (default)
Hold down MENU/SELECT until DSC CALL appears on the display
Scroll the list of functions with the UP/DOWN keys
Select SYSTEM and push MENU/SELECT as confirmation
Select BAND EDIT and push MENU/SELECT as confirmation
Scroll the list of functions with the UP/DOWN keys
Set up: BAND: USA-CANADA-INTERNATIONAL (default)
25
10.5 Beep (Enable/disable keypad beep)
Everytime a button is pressed, the radio emits a signal as confirmation or to
warn about wrong operations.
To disable these beeps, follow this procedure:
Hold down MENU/SELECT until DSC CALL appears on the display
Scroll the list of functions with the UP/DOWN keys
Select SYSTEM and confirm by pushing MENU/SELECT
Scroll the list of functions with the UP/DOWN keys
Select KEY BEEP and confirm by pushing MENU/SELECT